產品時間：2021-12-30
CVGL73TP3 millipore Durapore 濾芯過濾0.22um，MSDS （material safety data sheet） or SDS, CoA and CoQ, dossiers, brochures and other available documents.
| 品牌 | Millipore/美國 | 應用領域 | 醫療衛生,環保,生物產業,制藥,綜合 |
|---|
CVGL73TP3 millipore Durapore 濾芯過濾0.22um
| Description | |
|---|---|
| Catalogue Number | CVGL73TP3 |
| Trade Name |
|
| Description | Durapore® Cartridge Filter 30 in. 0.22 µm Code 7 |
CVGL73TP3 millipore Durapore 濾芯過濾0.22um
| Product Information | |
|---|---|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C |
| Maximum Inlet Pressure, bar (psi) | Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C |
| Cartridge Code | Code 7 (2-226) O-rings w/locking-tabs |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400 |
| Biological Information | |
|---|---|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Durapore® |
| Sterility | Other |
| Sterilization | 30 SIP cycles of 30 min @ 135 °C; 30 autoclave cycles of 60 min @ 126 °C |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10? CFU/cm2 using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information | |
|---|---|
| Pore Size | 0.22 µm |
| Air Diffusion at 23 °C | ≤40 mL/min @ 2.75 bar (40 psig) in water |
| Bubble Point at 23 °C | ≥3450 mbar (50 psig) air with water |
| Flow Rate | 50 L/min @ 460 mbar ΔP |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| TOC/Conductivity | After sterilization and a controlled water flush of 16.5 L, samples exhibited less than 500 ppb TOC per USP<643>and less than 1.3 µS/cm per USP<645>. |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Materials Information | |
|---|---|
| Chemistry |
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| 理化信息 | |
|---|---|
| 毛孔大小 | 0.22微米 |
| 23°C時空氣擴散 | 在水中2.75 bar（40 psig）時≤40 mL / min |
| 沸點23°C | ≥3450 mbar（50 psig）空氣與水 |
| 流量 | 50 L / min @ 460 mbarΔP |
| 間接食品添加劑 | 所有成分材料均符合21 CFR 177-182中引用的FDA間接食品添加劑要求。所有成分材料均符合歐盟框架法規[1935/2004 / EC]中有關與食品接觸的材料和物品的要求。 |
| 非光纖釋放 | 此產物用的Durapore制造®滿足的標準，“非纖維釋放"過濾器如21 CFR 210.3（b）中（6）所定義的膜。 |
| TOC /電導率 | 滅菌和控制水沖洗量為16.5 L后，每個USP<643>樣品的TOC小于500 ppb，每個USP<645>的樣品TOC小于1.3 µS / cm。 |
| USP細菌內毒素 | 根據the變形細胞溶解液（LAL）試驗測定，樣品水提取物的含量少于0.5 EU / mL。 |
| 外型尺寸 | |
|---|---|
| 墨盒標稱長度 | 30英寸（75厘米） |
| 直徑 | 6.9厘米（2.7英寸） |
| 過濾面積 | 2.07平方米 |
| 裝置尺寸 | 30英寸 |
| 材料信息 | |
|---|---|
| 化學 |
|
| 設備材質 |
|
| 密封材料 | 矽膠（是） |
| 支撐材料 | 聚丙烯 |
| 包裝信息 | |
|---|---|
| 材料尺寸 | 3 |
| 材料包 | 雙重易開袋 |
| 技術指標 | |
|---|---|
| 可氧化物質 | 用水沖洗≥3 L后，將滿足USP可氧化物質測試要求 |
上海登寧科技有限公司是國內專業的實驗過濾材料提供商，致力于將質量、可靠性和操作性突出的產品帶給每一位客戶。
公司產品包括各類濾紙、濾膜、濾器以及輔助器材，主營定性濾紙，定量濾紙，層析紙，玻璃微纖維濾紙；石英濾膜，無機膜，聚碳酸酯膜(PC)，聚四氟乙烯(PTFE)濾膜，聚偏二氟乙烯(PVDF)膜，尼龍(Nylon)膜,聚醚砜(PES)膜，醋酸纖維素(CA)膜，硝酸纖維素(NC)膜，混合纖維素膜(MCE)；針頭式濾器，囊式濾器，可換膜過濾器，超濾離心管等。廣泛應用于生命科學，農業，藥物醫學，化工，食品，水質分析，環境監測等各個領域，公司與各Q球廠家建立了穩定的合作關系，確保品質的同時更可以滿足客戶對于便捷和實惠的需求。
以客戶為中心是公司生存的根本，專注實驗過濾材料是公司的發展方向，我們將砥礪前行，助力客戶實現更高更快的發展。
13061661322
